2018 Mazda CX-9 Key Fob Battery Replacement
Do you need help with the 2018 Mazda CX-9 Key Fob Battery Replacement? With just a few tips and tricks, you can do it simply. Come and learn how to replace your key battery.
Change the ignition cylinder
Changing the ignition cylinder for a 2018 Mazda CX-9 isn’t a difficult task. The key battery has a life of about a year, so it’s a good idea to replace it once a year. However, there are a few things you should check before making the switch.
First, you’ll want to make sure your vehicle is in the Park position. If the vehicle isn’t in Park, then the key will not turn. Also, check the door latches on your car. If they are stuck in the locked position, your key fob won’t work either.
If you’re not able to start your vehicle, try pressing the push-button start. You can tell if it’s working because the light should illuminate. If it doesn’t, you may have a broken lock part on the ignition.
When replacing the ignition cylinder for a 2018 Mazda 5 CX-9, you’ll want to make sure you have all the necessary tools. This includes a flat-head screwdriver with a soft tip. You’ll also need a plastic pry bar tool.
Replace the battery
Fortunately, 2018 Mazda CX-9 Key Fob Battery Replacement is not too difficult to do. You can do it yourself, or you can have it done by a professional at your local dealership. Regardless of your choice, you will need to know the correct procedure.
First, you will need to find the small black plastic release switch on the side of the key fob. You can use a screwdriver to open it, or you can use a pry bar tool.
After you locate the small switch, you should slide it towards the outer edge of the fob. This will release the backup or emergency metal ignition key. You can either use a flathead screwdriver to pry it from the key case, or you can use a pry tool.
Next, you will need to remove the old key fob battery. This can be done using a pry tool, a flathead screwdriver, or a small flat head screwdriver that is included in a precision screwdriver set.
Open the key fob
Having your Mazda key fob battery replaced is an easy process. However, you may be wondering if you need to open the case to get it done. In this article, we’ll discuss some of the steps to take in order to perform this task.
First, you’ll need to locate the small black plastic release switch. This can be found on the outer edge of the key compartment. Pulling the switch toward the outside edge of the key fob will create an opening in the plastic. This allows you to remove the key and its associated metal auxiliary key.
Once you’ve located the small release switch, insert a flathead screwdriver into the indentation. The screwdriver should be inserted into the bottom right corner of the indentation.
With the flathead screwdriver inserted into the indentation, you should be able to press down and loosen the battery cover. The cover should then pop off relatively easily. Once it’s off, you’ll need to set the cover aside in a safe place.
Get a replacement key
Depending on your Mazda CX-9 model, you will need a different key fob battery. The newer models have advanced keyless entry systems. This is a system where one button opens the car door and the ignition switch will activate the engine. However, some of these key fobs will not work if you’re not near the car.
To replace your key fob battery, you will need a flat head screwdriver with a soft tip. The battery is located under a round black plastic cap. The key fob is attached to the cap with a rubber ring. If you need to replace the battery, make sure it doesn’t damage the rubber ring.
To remove the key fob, you can use a plastic pry bar tool. You can also use a flat head screwdriver to pry open the case. Then, you can take off the metal auxiliary key.
The first step in replacing the key fob battery is to find the small black plastic release switch. Slide it towards the outer edge of the key. Then, gently pry the case open.
